Satintex ( Cover plaster imperfections, with excellent adhesion, flexibility, water and alkali resistance)

R129.45R1,832.09 Exl VAT

Clear
SKU: ENV-WHT Categories: ,

SATINTEX

CATEGORY
Wall Coating

DESCRIPTION
Satintex has been formulated using specialised raw materials to achieve a tough coating with a
smooth textured finish. Satintex has been designed to cover plaster imperfections, with excellent
adhesion, flexibility, water and alkali resistance. Satintex can be used as a first coat on good
quality, cured plaster. Satintex can be tinted in a variety of colours and can be over coated with
a final coat if required.

FEATURES
• Satintex is non-yellowing, odourless, non-toxic and enviro-friendly.
• For use on interior or exterior walls.
• Available in a wide range of colours.
• Can be applied directly to good quality, cured plaster as a primer.
• Excellent flexibility
• Gives a smooth texture with high film build.
• Excellent resistance to hairline cracking

AREAS OF USE
• Interior and Exterior walls
• Hiding bad blaster imperfections
• Combatting hairline cracks

SURFACE PREPARATION AND APPLICATION
New Plaster
1. Remove all loose friable material.
2. Satintex can be applied directly to good quality, cured plaster.
3. If the plaster is very friable then apply 1 coat of Paintcor’s AcrySeal Acrylic Sealer diluted
1:1 with water to all new plaster. Allow to dry for 1 hour @ 25 degrees C.
4. Apply 1 or 2 coats of Paintcor’s Satintex by brush or roller

Previously Painted Plaster
Check adhesion of existing paint. (Cross hatch method) Using a Stanley knife, cut through the paint
surface to the substrate vertically and horizontally approximately 3mm apart, creating little
squares. If the edges of the squares curl up, and the square can easily be removed, this means the
adhesion of the old paint system is failing.

If adhesion is poor:
1. Remove all old paint back to existing plaster.
2. If surface is powdery (chalking), wash to remove all powder. Allow to dry.
3. Apply 1 coat of Paintcor’s AcrySeal Acrylic Sealer diluted 1:1 with water to all exposed
plaster and washed chalking surfaces. Allow to dry.
4. Apply 1 or 2 coats of Paintcor’s Satintex by brush or roller

If adhesion is good:
1. Wash walls to remove all dirt and dust. Allow to dry.
2. Apply Satintex as per no 4 above

Applying Satintex correctly requires professional painters with knowledge of applying textured
finishes. Incorrectly applied Satintex will give a poor, uneven finish. Please contact our
Technical Department for training on application of textured coatings. Avoid applying Satintex in
Direct sunlight or when ambient temperatures are 30°C or above.

TIPS ON TEXTURES
• Work Quickly.
• Keep a wet edge at all times.
• Work corner to corner, do not stop in the middle of the wall.
• Use scaffolding on double story walls with two applicators meeting each other’s wet edge.

APPLICATION EQUIPMENT
Apply by Brush or Sheepskin/Synthetic Roller.

CLEANING EQUIPMENT
Clean all equipment with water immediately after use.

STORAGE
Keep stored in cool, dry conditions and away from children.

Additional information

size

1L, 5L, 20L

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Envirocoat Description & Application

Download

Envirocoat Technical Specifications

Download

Envirocoat Material Safety Data Sheets

Download

Main Menu

Satintex ( Cover plaster imperfections, with excellent adhesion, flexibility, water and alkali resistance)

R129.45R1,832.09 Exl VAT

Add to Cart